IP ENCODER
DECLARATION ENCODER
WAN/LAN PORTS
2x
VIDEO INPUTS
1x SDI
1x HDMI
ENCODING LEVEL:
Level 1: HEVC
Level 2: H.264
For each encoding level, two broadcast streams can be generated and streamed.
At level 1, Target-1 & Target-2 can be defined with two different IP destination/addresses .
The same goes for level 2
Thus, a maximum of four streams can be delivered to four different IP addresses or platforms.
2x HEVC and 2x H.264.
EXCEPTION LEVEL 1 / HEVC - ULL MODE
In Ultra Low Latency (ULL) mode only Target-1 in UDP TS can be selected! Target-2 is then not selectable.
At level 2 in H.264 mode both targets can still be used in this configuration.
For each video input, an encoding level must be selected or an input can be set to both levels.
SDI input on HEVC or H.264
HDMI input to H.264 or HEVC
SDI or HDMI input on both levels
BANDWIDTH / CBR - VBR
For all TX modes (*** except Broadcast) you can choose between CBR *** (constant bitrate) or VBR (variable bitrate), from 1Mbits - 30Mbits.
The bit rate can be changed during transmission, on the fly, on all targets.
After the login has been enabled, the following parameters are visible and can be changed in the encoder:
SELECT INPUT: SDI or HDMI
CBR or VBR: depending on the connection between 1-30Mbits (see below)
Choose level: HEVC or H.264, incl. The respective parameter for the encoding. (see below)
Protocols: select the streaming protocol
Addressing: Input of the IP address and port
SPECIFICATIONS: ENCODER LEVEL-1 HEVC
The following parameters are available in HEVC Level:
VIDEO INPUT:
1x SDI input: HD / SD
1x HDMI input: HD / SD
OPTION:
DVI-D Input: HD / SDI
VIDEO ENCODING LEVEL 1 (at least 4Mbits per target)
Encoding Level 1: HEVC / H.265 in 4: 2: 2/4: 2: 0, 8bit or 10bit
TX MODE: ULL - Ultra Low (Latency 100-350ms)
suitable for live switching / bidirectional connections
TX MODE: Broadcast Broadband (Latency 900-1'500ms)
* for unidirectional connections / possibly Live switching
TX MODE: ISR Low Bandwidth (Latency 900-1'500ms)
can be used with low bandwidth
ZIXI & SRT PROTOCOLL
for uni-and bi-directional live broadcasts with the highest quality
In Zixi or SRT mode all lost packets are restored - (packet-loss-recovery protocol)
STREAMING PROTOCOLS TARGET 1
Stream Name: Channel-1
Streaming Prtcl:
UDP TS
RTP TS
Pro-MPEG
Zixi
Target Address: xxx.xxx.xxx.xxx
Target port: xxxxx
Multicast Interf. : Ethernet-2
TTL: Standard (128)
UDP Packet Size: Standard (1316)
SAP: on / off
Traffic shaping: on / off
STREAMING PROTOCOLS TARGET 2
Stream Name: Channel 2
Streaming Prtcl: UDP TS
: RTP TS
: Pro-MPEG
: Zixi
Target Address: xxx.xxx.xxx.xxx
Target port: xxxxx
Multicast Interf. : Ethernet-2
TTL: Standard (128)
UDP Packet Size: Standard (1316)
SAP: on / off
Traffic shaping: on / off
-------------------------------------------------- ---------
SPECIFICATIONS: ENCODER LEVEL-2 H.264
The following parameters are available in H.264 Level:
VIDEO INPUT:
1x SDI input: HD / SD
1x HDMI input: HD / SD
OPTION
DVI-D Input: HD / SDI
VIDEO ENCODING LEVEL 2 / H.264 (at least 6Mbits per target)
Encoding Level 2: H.264
Tx Mode: Baseline Profiles
: Main Profile
: High profile
STREAMING PROTOCOLS TARGET 1
Stream Name: Channel-1
Streaming Prtcl: RTP ES (RTSP)
: UDP TS
: RTP TS
: Pro-MPEG
: Zixi
: RTMP
Target Address: xxx.xxx.xxx.xxx
Target port: xxxxx
Multicast Interf. : Ethernet-2
TTL: Standard (128)
UDP Packet Size: Standard (1316)
SAP: on / off
Traffic shaping: on / off
STREAMING PROTOCOLS TARGET 2
Stream Name: Channel 2
Streaming Prtcl: UDP TS
: RTP TS
: ProMPEG
: Zixi
Target Address: xxx.xxx.xxx.xxx
Target port: xxxxx
Multicast Interf. : Ethernet-2
TTL: Standard (128)
UDP Packet Size: Standard (1316)
SAP: on / off
Traffic shaping: on / off